Search
Close this search box.
Search
Close this search box.

Angled Nestdivert (2 pieces)

Angled Nestdivert (2 pieces) – Prevent Swallows’ Nests

 

Deter house martins and swallows from nesting under all other sections of the roof.

Cost: €11.75+VAT per pack of 2

(1 customer review)

12.58 (ex.VAT )

Total amount saved:
Quantity Discount Unit Price
1 0% 12.58
2+ 10% 11.32

Prevent Swallows and House Martins from Building Nests

NestDivert deters house martins, swallows and swifts from nesting under sections of your roof. It is easy to install and stops these small birds from building their nests in your home’s eaves, gable and apex. It is a simple deterrent that will not harm the birds but stop them from nesting in your building. The design will not harm the birds and simply encourages them to move onto a more suitable area that will not be your home.

To prevent house martins and swallows from building nests under the eaves and soffits of your roof, the best option is to use NestDivert:

  • The design works with all roof types (horizontal or slanted) and can also be positioned behind downpipes.
  • It is very discreet, almost impossible to notice
  • 2 strips of 264mm manufactured from acrylic
  • Weatherproof and doesn’t turn yellow in the sunlight like poly-carbonate
  • Install in seconds and lasts for many years

There are 2 types of NestDivert available:

  • The “Flat NestDivert” for the apex or wall junctions of the roof (product sold HERE) and
  • The “Angled NestDivert” for all other sections (product sold on this page):

You are buying the “ANGLED Nest Divert” on this page.

See the NestDivert in Action

How to Install the Angled NestDivert

NestDivert is very easy to install. Simply peel away the protective tape and push into place. The product is manufactured from clear, transparent, non-corrosive and UV protected material. It  will not damage the exterior of your home by way of rust or chemicals.
Check the installation video below:

Installation Steps

Warning: When working at heights please take the necessary precautions to avoid accidents. It is illegal to disturb or destroy a live nest in Ireland. Only do so when the nest is not in use.

  1. Prepare the installation site by removing old nests and other debris.
  2. Thoroughly clean the soffit.
  3. Ensure the installation site is dry, as wet or damp conditions can affect how the adhesive tape bonds with surfaces.
  4. Carefully remove the red protective plastic covering from the clear double-sided tape adhesive on the NestDivert.
  5. Push the base of the NestDivert into place on the soffit, keeping it tight against the wall, the fingers pointing down and away from the building (As shown below).Angled-NestDivert-Installation
  6. Hold the NestDivert in place for 5 seconds for the adhesive tape to bond with the surface of the soffit.
  7. If you’re planning to remove the NestDiverts at a later stage to reinstall (redecorating) we would advise removing the gel tape and securing with 20mm self-tapping screws to the soffit by way of the pre-cut holes.

Maintenance: Annually clean away debris build-up by using soapy water and a cloth.

Additional Advice

  • When applying the NestDivert, the surface to be bonded to should be dry, dust-free, grease-free and thoroughly clean.
  • Avoid touching the exposed adhesive surface of the tape as this impairs its performance. The ideal cleaning method should incorporate the use of a solvent such as Isopropyl alcohol.
  • To attain the optimum bond strength sufficient pressure should be applied to the tape to ensure a good adhesive “wet out” on the substrates. This tape is a pressure-sensitive adhesive, and the best results are achieved with maximum surface contact under pressure.
  • Press NestDivert into place with sufficient pressure and leave for the bond strength to reach its optimum strength after 24 hours.
  • Non-PVC soffits need to be sealed correctly or bond will not be possible. Flaking paint or rotting soffits will need the NestDiverts to be secured using self 15-20mm tapping screws. We recommend replacing rotting soffits and/or sealing the soffit with standard outdoor wood paint.

1 review for Angled Nestdivert (2 pieces)

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-1 of 1 review
  1. Excellent product which solved the problem of swallows nesting on our house. The product is discreet and you can barely notice it on the soffit. If you want to prevent swallows nesting buy this product. It works a treat.

    (1) (0)
Add a review
You must be logged in to post a review Log In

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Shopping Basket
Scroll to Top