Specification
- L = 40mm
- W = 40mm
- H = 20mm
- Manufactured in the UK
- Grey nylon base with built-in sockets to take three 4mm diameter bird wire and gull wire posts. For use in mounting the post on surfaces that can not be drilled. i.e. metal, plastic, glass and even wood
- UV stabilised to prevent degradation in the weather
- Three-way base allows the installer to overcome the age-old problem of achieving an overhanging wire along the leading edge.
- Bases accept two posts that will be perpendicular to each other, mounted at an angle and one vertical post – the perpendicular arrangement also allows the installer to overcome the tricky challenge of turning corners neatly and effectively
- The bases can also be used as two-way intermediate fixing for bird netting wire rope perimeter frameworks where the surface can not be drilled. This is achieved by utilising the hole in one of the socket shoulders to feed the wire rope through
Usage
The bases can be bonded or mechanically fixed using the two holes in the mount’s base.
We recommend using Silirub N silicone adhesive or Fix All High Tack adhesive. The use of a surface activator will ensure the surface you are bonding to is prepared correctly.
If using adhesive, then fix your posts into your base before applying the adhesive.
Ideal for mounting bird posts on leadwork, uPVC, plastic, cladding, GRP, asphalt etc
Also handy for bonding to roof tiles and slates to hold netting perimeter wire rope close to pitched roofs.


Reviews
There are no reviews yet