• UV stabilised nylon base which accepts three bird posts, for use in mounting on surfaces that can not be drilled
  • The unique capability of being able to accept three 4mm bird posts allows the installer to overcome the age-old problem of achieving an overhanging wire along the leading edge
  • Can also be used as a two-way surface mount base for securing bird netting perimeter wire ropes to surfaces that also can’t be drilled
  • Suitable for metal, plastic, glass and wood supplied in grey, white, stone or black.
  • Can be bonded using Silirub N or Fix All or screwed in place using pre-drilled holes
  • For bonding use surface activator to clean the base and the surface being adhered to

38.80 (ex.VAT )


L = 40mm

W = 40mm

H = 20mm

Manufactured in the UK

To eliminate colour variance, the  3-Way Surface Mount Bases are manufactured under strict quality control to RAL colour codes. Colours available are:

  • Black – RAL 9005

Nylon base with built-in sockets to take three 4mm diameter bird wire and gull wire posts. For use in mounting the post on surfaces that can not be drilled. i.e. metal, plastic, glass and even wood

UV stabilised to prevent degradation in the weather

Three-way base allows the installer to overcome the age-old problem of achieving an overhanging wire along the leading edge

Bases accept two posts that are will be perpendicular to each other, mounted at an angle and one vertical post – the perpendicular arrangement also allows installer to overcome the tricky challenge of turning corners neatly and effectively

The bases can also be used as two-way intermediate fixing for bird netting wire rope perimeter frameworks where the surface can not be drilled. This is achieved by utilising the hole in one of the socket shoulders to feed the wire rope through


The bases can be bonded or mechanically fixed using the two holes in the mount’s base.

We recommend using Silirub N silicone adhesive or Fix All High Tack adhesive. The use of surface activator will ensure the surface you are bonding to is prepared correctly.

If using adhesive then fix your posts into your base before applying the adhesive.

Ideal for mounting bird posts on leadwork, upvc, plastic, cladding, GRP, asphalt etc

Also handy for bonding to roof tiles and slates to hold netting perimeter wire rope close to pitched roofs.

Scroll to Top