Disinfectant Wipes – Steri-7 Ultra Protect

Steri-7 Ultra Protect Disinfectant Wipes

Wet a surface with STERI-7 XTRA Wipes and a few seconds later any bacteria, viruses and spores on that surface will be dead. But STERI-7 XTRA doesn’t stop there. Leave the antibacterial wipes film to dry and a reactive barrier is created on the treated surface.

These wipes are registered and approved by the DAFM (PCS: 95532)

Usage

The STERI-7 XTRA antibacterial wipes can be used wherever the highest standards of disinfection are required and suitable for use in healthcare and food processing environments and all other workplaces where there is a risk of cross-contamination. These antibacterial wipes have been tested against and are effective against a number of commonly occurring bacteria, yeast and viruses that are known to be highly transmissible and can result in infections and illnesses.

Characteristics

• Perfume Free, wipe
• Active Ingredient 0.147% w/w Didecyldimethylammonium chloride, 0.086% w/w Benzalkonium chloride, 0.0854% w/w Polyhexamethylene biguanide
• Odour: Barely perceptible odour
• Oxidising: Non-oxidising (by EC criteria)
• Viscosity: Non-viscous
• Flash point°C:  >93
• Relative Density: 1
• pH: Approx 7
  

Instructions for use

Wipe surface spreading evenly and allow sufficient time to dry.

Regulatory compliance

STERI-7 XTRA is governed by the requirements of the Biocidal Product Directive (EU Regulation 98/8/EC). It is registered in every country that it will be sold (In Ireland, DAFM PCS: 95532). The product is labelled in accordance with the Biocidal Product Directive.

Safety Data Sheet

You can check Steri-7 Disinfectant Wipes MSDS Here

Safe handling and storage

Non-hazardous. Avoid contact with eyes. Full guidance on the handling and disposal of this product is provided in a separate Safety Data Sheet (see above).

Use Disinfectants Safely – Always read the label and product information before use. Never mix Steri-7 disinfectant wipes with other products or chemicals.